Group A Rally Cars - WRC Components

Deficarsport s.p.r.l.
Camshafts - Engines - Electronics

language

GT & Sport Cars | WRC & Group A Rally Cars | Group N Rally & Road Cars | Touring Cars | Electronic Components

PRICE LIST FOR COMPETITION UNITS
PRICE FOR EACH PIECE

Machining services
Machining services are carried out to the highest standard and quality. These facilities enable special or unusual requests to be accommodated with minimum delay.

DFC-10319-7-M/C	Turbine wheel-Cutback to 7°& balance.	75.00 €
DFC-10320-MC	Turbine housing-O/R “Quick release”.	75.00 €
DFC-10320-POL	Turbine housing-Pol. Internally polished.	99.20 €
DFC-1032-STR	Turbine housing-W/G “Strengthened waste gate arm	25.00 €
DFC-10310-M/C	Compressor housing-FIA-Modify. for restrictor.	75.00 €
DFC-10174-M/C	Compressor housing-RAC-Modify. for restrictor.	75.00 €

Component Replacement Parts.
Individual component parts are priced as follows when added as additional work to an overhaul. Only genuine Garret or special DFC components are used.

DFC-430027-39	Bearing housing Std.	75.00 €
DFC-451311-14	Bearing housing-Modified for 360° thrust bearings.	99.20 €
DFC-451311-14	Turbine wheel-Std. Inconel turbine wheel.	199.00 €
DFC-10319-7	Turbine wheel Cutback with 7°	273.00 €
DFC-445305-12	Turbine wheel-Maram with 7°	1636.00 €
DFC-409629-17	Back plate-Std standard Garret assembly.	38.00 €
DFC-441341-2	Compressor wheel-Std standard	120.00 €

Complete Turbochargers
All turbochargers and every rotating assembly are tested in a high speed balancing machine rigs up to 100.000 rpm to maintain a 100% quality control record. Each turbocharger carries its own unique serial number used to record maintenance history.

DFC-452059-1	Standard new turbocharger.	1190.00 €
DFC-S103	Group N turbocharger.	1580.00 €
DFC-S104	Group A turbocharger.	1892.00 €
DFC-S105	ALS-MARAM Group A turbocharger.	3372.00 €

CHRA (Centre housing rotating assembly)
Comprising of a water cooled housing, 360° thrust bearing, turbine wheel, compressor wheel, journal bearings and back plate. Every CHRA is balanced up to 10.000 rpm.

DFC-S100	Group N CHRA .	831.00 €
DFC-S101	Group A CHRA .	918.00 €
DFC-S102	ALS Group A CHRA.	2276.00 €

Special parts

DFC-10308-32	Restrictor Grp. N 32 mm.	199.00 €
DFC-10308-34	Restrictor Grp. A 34 mm.	199.00 €
DFC-1039	Restrictor Grp. A 34 mm / 76 mm.	199.00 €
DFC-10286	Restrictor Grp. N 32 mm / RAC std. Diam.	199.00 €
DFC-10287	Restrictor Grp. A 34 mm / RAC dia. 76 mm.	149.00 €
DFC-67	Actuator-Modified with stronger spring.	174.00 €
DFC-64R	Actuator Group A-Modified with stronger spring.	174.00 €
DFC-409589-316	Compressor housing-sdt.	124.00 €
DFC-10310-RAC	Compressor housing-RAC for RAC air restrictor.	199.00 €
DFC-10310-FIA	Compressor housing-FIA for FIA air restrictor.	199.00 €
DFC-413746-5	Turbine housing-Std for Group N.	432.00 €
DFC-10320	Turbine housing-Grp A. « Quick release » Strengthened waste gate arm and polished.	618.00 €
DFC-10320-0	Turbine housing-Grp A. Nimonic waste gate spindle strengthened arm and internally polished.	729.00 €

WRC IHI Escort Turbochargers

DFC-2000-WRC	New IHI WRC Turbocharger	5347.00 €
DFC-2001-WRC	Exhaust Housing Type 18-16	1800.00 €
DFC-2002-WRC	Complete new Turbo WRC Turbocharger modified interior and special micro balancing.	7200.00 €
DFC-2003-WRC	Normal Overhaul for WRC Turbocharger	2100.00 €
DFC-2004-WRC	Special preparation for better liability	968.00 €

Note:
Any make of turbo or application not listed can normally be re-manufactured within 7 working days. Telephone +32.67.221630 with your requirements for prompt advice. These prices do not include VAT nor delivery.

Ford Cosworth special Parts – Price for 1 piece

DFC-3038	Schmitthelm high quality WRC Valve springs	43.00 €
DFC-3039	Top Valve springs plates light material Ford	12.00 €
DFC-3041	Valve Lifter light material	50.00 €
DFC-3042	Valve plates for clearance adjustment (1.5-4.0 mm)	8.00 €
DFC-3043	Adjustable Camshafts wheel in full aluminium	480.00 €
DFC-3044	Special Time belt	73.00 €
DFC-3045	Special Cylinder-head gasket Ford Cosworth	550.00 €
DFC-3046	GR. A pistons for high compression	422.00 €
DFC-3046-A	GR. A Piston rings set	200.00 €
DFC 3047	WRC OMEGA Pistons for high compression	420.00 €
DFC-3048	WRC special con rod assembly	622.00 €
DFC-3049	Special Cylinder-head transformation from combustion chamber inlet and exhaust ports and Beryllium valve seats	2860.00 €
DFC-3050	Normal Cylinder-head transformation from combustion chamber inlet and exhaust ports	1370.00 €
DFC-3051	Special air box complete with pipe and filter in carbon fibre	1300.00 €
DFC-3091	Special air filter pipe Camco	170.00 €
DFC-3052	Champion spark plugs QC 57C – ST	87.00 €

Electronic and engine Mapping Software

Ford Cosworth Turbocharger systems with ALS

DFC-3053	T 6 200 ECU with DFC Software	4500.00 €
DFC-3054	T 4 ECU with DFC Software (Ex T6)	4200.00 €
DFC-3055	T 2 ECU with DFC Software	2950.00 €
DFC-3056	Complete engine Harness for Group A Engines	1983.20 €
DFC-3107	T10S special ECU for 4 to 12 Cylinder Engines	18000.00 €
DFC-3057	Complete engine Harness for WRC	2504.00 €
DFC-3108	T 6M 2000 ECU with DFC Software	4500.00€

Electronic additional parts for T 6 ECU systems

DFC-3061	Turbo speed sensor Keyence FS-M1H	1385.00 €
DFC-3062	Turbo speed patch lead	120.00 €
DFC-3063	Restrictor depression sensor	107.60 €
DFC-3064	CAN int. Card for faster Data-acquisition	1112.00 €
DFC-3065	CAN Lead for PC link	120.00 €
DFC-3066	Detonation sensor for Spark plug	745.00 €
DFC-3067	Distributor less special single Coil 4 Cyl.	124.00 €
DFC-3068	Distributor less special single Coil 4 Cyl.	226.00 €
DFC-3069	Special Throttle potentiometer	620.40 €
DFC-3070	Lambda sensor Bosch LMS-11	230.40 €
DFC-3071	Lambda sensor NTK	893.00 €
DFC-3072	Special Air-temperature sensor Jaeger	86.90 €
DFC-3073	Stack display with T 6 Data-stream	1837.00 €
DFC-3074	Star line and Full gear shift kit	298.00 €
DFC-3075	Special Rod bolts	60.00 €
DFC-3076	Modified ALS valve	671.00 €
DFC-3077	Special crank poly with 36 teeth	495.80 €

Individual engine mapping work on Dino
We can make individual mapping on the Dino, the ECU T 6 systems can be adapted to any engine type, the engine Harness can be made also in a individual form.

top